NOTE: The dynamic operator sound pressure level uncertainty is +/-2 dB(A). The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and maintained. The sound level may vary at different engine cooling fan speeds. The measurement was conducted at 70% of the maximum engine cooling fan speed. The average dynamic operator sound pressure level when ISO 6396:2008 is used to measure the value for an enclosed cab is 78 dB(A). NOTE: The dynamic sound power level uncertainty is +/-2 dB(A). The average dynamic spectator sound power level when ISO 6395:2008 is used to measure the value for a machine is 116 dB(A). Falling Object Protective Structure (FOPS) meets the following criteria ISO 3449:2005 LEVEL II. Rollover Protective Structure (ROPS) meets the following criteria ISO 3471:2008.įalling Object Protective Structure (FOPS) meets the following criteria ISO 3449:2005 LEVEL II. Rollover Protective Structure (ROPS) meets the following criteria ISO 3471:2008. Implement pump output measured at 1,750 engine rpm and 20 000 kPa (2,900 psi).įan pump output measured at 1,750 engine rpm and 17 000 kPa (2,470 psi) Fan pump output measured at 1,750 engine rpm and 17 000 kPa (2,470 psi) Implement pump output measured at 1,750 engine rpm and 20 000 kPa (2,900 psi). Steering pump output measured at 1,750 engine rpm and 30 000 kPa (4,350 psi). Piston-type geared to flywheel Piston-type geared to flywheel Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. All non-road Tier 4 Final diesel engines are required to use only ultra-low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less.ĭiesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. Consult your OMM for further machine specific fuel recommendations.Īll non-road Tier 4 Final diesel engines are required to use only ultra-low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Cat DEO-ULSTM or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. Consult your OMM for further machine specific fuel recommendations. Sampling ports for engine oil, coolant, powertrain oil, hydraulic oilBiodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. Independent steering and implement hydraulic pumps Load sensing dozer (lift/tilt) hydraulics Lifetime lubricated track rollers and idlers Sealed and lubricated track: 44 section positive pin retention (PPR) Suspended undercarriage: Heavy Duty Positive Pin Retention (PPR) Consult your Cat dealer for details.Ĥ-planetary double reduction final drivesĭifferential steering tiller bar with dual-twist control Standard and optional equipment may vary. Please consult your Cat dealer for availability in your area. Configurations and features may vary by region. Please consult the Operations and Maintenance Manual (OMM) for further information. ***Up to B100 capable when equipped with optional B100-compliant fuel lines. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. **Refer to guidelines for successful application. *Cat engines are compatible with the following renewable, alternative, and bio-fuels** with lower greenhouse gas emission impact: Up to B20 biodiesel (FAME)***, up to 100% HVO and GTL renewable fuels. Advertised power is tested per the specified standard in effect at the time of manufacture. Net power advertised is the power available at the flywheel when engine is equipped with a fan at maximum speed, air cleaner, muffler and alternator. Net Power - Rated - ISO 9249/SAE J1349 (DIN)
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |